Tree removal can be quite dangerous and even life-threatening. It really is never recommended to remove a tree by yourself unless it is a small one that you’re confident you can handle safely. Otherwise, tree removal ought to be left in the hands of professionally-trained and equipped tree service contractors. Should you have a tree on your property that’s fairly small, but must be removed, it is possible to possible do it yourself with the proper tools, knowledge, and planning.

Tree Removal Preparation

Proper preparation for small tree removal involves gathering all of your needed supplies, as well as, a comprehensive inspection of the tree. Turn to see if the tree leans one way or the other, and plan a getaway route in case it does not fall how you expect it to fall. Also, examine whether there are any obstacles in any direction of the tree, including vehicles, structures, along with other trees. For anyone who is sure there’s enough safe clearance for the tree to fall, then you can certainly move ahead to gathering your equipment and tools. This includes:

Safety Gear (Utility gloves, goggles, hard hat, steel toe boots, etc.)

Chainsaw

Ax or Hacksaw

Ladder

Rope

Wedges

First Aid Kit

To Remove a Tree

Once you have all of your equipment and supplies, you will get started removing the tree. First, use your ax to knock on the bark a few times, and in a few different places, to understand how solid or hollow the tree is. Finding a less dense area to cut will undoubtedly be easier. Next, plan which side of the tree you would like to make your cut. Look to see where the tree naturally leans; it is best to cut a tree in the direction where it wants to naturally fall. Be Discover more here where in fact the tree drops is level so the tree will not roll or bounce after it falls.

Create a horizontal cut at hip-height, and about 1/3rd into the tree. Do this on the side of the tree where you want it to fall. If you wish the tree to fall to the right, you must cause you to cut on a single side so that it falls inward, towards the cut. The tree will fall perpendicular to your horizontal cut. Your second cut should create a wedge into the tree. So make the next cut at an angle from the original cut. It should look like a lemon wedge.

Your third cut is named a back cut, and is should be made on the opposite side of your wedge cut. This cut will make the tree fall over privately of one’s wedge cut. Ensure it is about 1.5 inches above the wedge cut, and as thick as possible. Also you can use a wedge to avoid the tree from settling onto the chainsaw. Add more wedges as necessary before tree begins to fall. Then run! But usually do not turn your back on the tree as it falls.