The thin-film photocatalyst is easy to be recovered with stability. The active component responsible for the photodegradation is identified and a Z-scheme mechanism is proposed.An issue in engineered wood products, like oriented strand lumber (OSL), is the low thermal conductivity coefficient of raw material, preventing the fast transfer of heat into the core of composite mats. The aim of this paper is to investigate the effect of sepiolite at nanoscale with aspect ratio of 115, in mixture with urea-formaldehyde resin (UF), and its effect on thermal conductivity coefficient of the final panel. Sepiolite was mixed with UF resin for 20 min prior to being sprayed onto wood strips in a rotary drum. Ten percent of sepiolite was mixed with the resin, based on the dry weight of UF resin. OSL panels with two resin contents, namely 8% and 10%, were manufactured. Temperature was measured at the core section of the mat at 5-second intervals, using a digital thermometer. The thermal conductivity coefficient of OSL specimens was calculated based on Fourier’s Law for heat conduction. With regard to the fact that an improved thermal conductivity would ultimately be translated into a more effective polymerization of the resin, hardness of the panel was measured, at different depths of penetration of the Janka ball, to find out how the improved conductivity affected the hardness of the produced composite panels. The measurement of core temperature in OSL panels revealed that sepiolite-treated panels with 10% resin content had a higher core temperature in comparison to the ones containing 8% resin. Furthermore, it was revealed that the addition of sepiolite increased thermal conductivity in OSL panels made with 8% and 10% resin contents, by 36% and 40%, respectively. The addition of sepiolite significantly increased hardness values in all penetration depths. Retinoid Receptor agonist Hardness increased as sepiolite content increased. Considering the fact that the amount of sepiolite content was very low, and therefore it could not physically impact hardness increase, the significant increase in hardness values was attributed to the improvement in the thermal conductivity of panels and subsequent, more complete, curing of resin.The reasonable design of magnetic carbon-based composites is of great significance to improving the microwave absorption (MA) performance of the absorber. In this work, ultrafine FeNi3 nanocrystals (5-7 nm) embedded in a 3D honeycomb-like carbon matrix (FeNi3@C) were synthesized via a facile strategy that included a drying and carbonization process. Because of the soft magnetic property of the FeNi3 nanocrystals and their unique 3D honeycomb-like structure, the FeNi3@C composites exhibit excellent MA abilities. When the filler loading ratio of FeNi3@C/paraffin composites is only 30 wt%, the maximum reflection loss (RL) value is -40.6 dB at 10.04 GHz. Meanwhile, an ultra-wide absorption frequency bandwidth of 13.0 GHz (5.0-18.0 GHz over -10 dB) can be obtained in the thickness range of 2.0-4.5 mm, and this means that the absorber can consume 90% of the incident waves. It benefits from the dual loss components, multiple polarizations, and multiple reflections for improving MA performances of FeNi3@C composites. These observations suggest that the 3D honeycomb-like FeNi3@C composites have broad application prospects in exploring new MA materials that have a wide frequency bandwidth and strong absorption.In the search for new drug candidates, researchers turn to natural substances isolated from plants which may be either used directly or may serve as a source for chemical modifications. An interesting strategy in the design of novel anticancer agents is based on the conjugation of two or more biologically active structural motifs into one hybrid compound. In this study, we investigated the anticancer potential of 4-benzyl-5,7-dimethoxy-4-methyl-3-methylidene-3,4-dihydro-2H-chroman-2-one (DL-247), a new hybrid molecule combining a chroman-2-one skeleton with an exo-methylidene bond conjugated with a carbonyl group, in human myeloid leukemia HL-60 cell line. The cytotoxicity of the new compound was tested using MTT assay. The effect of DL-247 on cell proliferation and apoptosis induction were studied by flow cytometry, fluorometric assay and ELISA analysis. DL-247 displayed high cytotoxic activity (IC50 = 1.15 µM, after 24 h incubation), significantly inhibited cell proliferation and induced apoptosis by both, the intrinsic and extrinsic pathways. A combination of DL-247 with taxol exhibited a strong synergistic effect on DNA damage generation, apoptosis induction and inhibition of cell growth.Weaning usually leads to stress in livestock, which has a negative impact on their growth and development. Research on oxidative stress and inflammation induced by weaning has not been reported in goats. Here, we focused on oxidative stress profile and inflammation status of the lower gut (jejunum, ileum, and colon) of goats. First, we illustrated the status of antioxidant activity and inflammation in the intestine of young goats on pre-(2 weeks postnatal, 2 wkpn) or post-(11 wkpn, weaning at day 45 postnatal)-weaned period of young goats. Malondialdehyde (MDA) was higher (p less then 0.0001) in jejunum and ileum of the young goats in 11 wkpn than that in 2 wkpn, whereas superoxide dismutase (SOD) activity was lower (p = 0.012) in the lower gut of the young goats with 11 wkpn than that in 2 wkpn. Furthermore, we intended to explore the protective influence of a probiotic additive (Lactobacillus plantarum (LAC) P-8, 10 g/d) and a prebiotic additive (Sangrovit®, Macleaya cordata (MAC) extract 3.75% w/w premixower gut.The simultaneous and independent measurements of two-dimensional (2D) displacements are significant for 2D positioning. Here a planar inductive sensor which is based on the principle of electromagnetic induction is proposed. The sensor is composed of a primary coil and a secondary coil. The primary coil consists of an array of planar spiral coils which are arranged as an m × n matrix. The primary coil is supplied with 4 kHz alternating current to generate an array of pulsating magnetic field. The secondary coil contains four spiral coils which are arranged as a 2 × 2 matrix. Thereby, four roads of modulated signals whose amplitudes vary with displacements of the secondary coil along x- and y-axis are induced. An algorithm based on the Coordinate Rotation Digital Computer algorithm is introduced to resolve the planar displacements. The structure and working principle of the sensor are proposed firstly. Then, the finite element analysis of the electromagnetic model and the numerical simulation of the algorithm are given.